To use the PES-2203, follow the steps below.

1. Connect to PHPoC board

PES-2203 can not be used alone. Be sure to connect to PHPoC board.

2. Installing the software (IDE)

PHPoC Debugger is a software which is used for configuring PHPoC products and developing PHPoC script. It is required to install this software on your PC because PES-2403 must be connected to PHPoC board.

3. Use sd_340 Library and Sample Codes

The sd_340 library is the default library for the PHPoC boards. You can use the PES-2203 simply by using the ADC-related functions of this library.

Please refer to the following pages for the usage of ADC related functions of sd_340 library.