Overview
Introduction
The P4S-348-R2 (PHPoC Shield 2 for Arduino) is a shield that connects Arduino to a wired or wireless network. After attaching this shield on top of the Arduino and connecting the LAN cable or USB wireless dongle, you can connect Arduino to the Internet by simply setting up the network.
The network function of this shield is based on the TCP/IP stack using PHPoC interpreter. The shield can be easily accessed by PHPoC Library. PHPoC Library is very similar to the usage of Arduino Ethernet library. Therefore, source codes using existing Ethernet library can be used immediately after modifying just few lines. Furthermore, Phpoc Library has a wider range of applications since it supports a variety of API(TELNET, Web socket and ESMTP).
Unlike the existing PHPoC Shield (P4S-348), the P4S-348-R2 is equipped with an SPC port for communication with the Smart Expansion Boards for Shield 2, which provides a wide range of applications.
※ What is smart expansion boards for Shield 2?
Features
- Equipped with SPC port: for smart expansion boards for Shield 2
- Network Shield for Arduino (Compatible boards: Uno and Mega)
- Communication with Arduino by SPI
- Power: DC 5V (Supplied from Arduino boards)
- Network controller: PHPoC interpreter
- Ethernet: 10/100Mb
- Wireless LAN: IEEE802.11b/g
- WLAN security: WPA-PSK/Enterprise
- Web settings (Smartphone or PC)
- Embedded web applications: Web Serial monitor, Web Serial Plotter, Web Remote control (Push, Slide and Pad)
- Save time information (RTC - Battery Backup)
- Support IPv6
Protocol Stack
